3rd Gen Toyota 4Runner Vent Cover | OEM Upgrade

Why Upgrade your from OEM Vent System? 

The OEM covers typically break within a year or two after the vehicle was made. They originally are designed to let air out similar to an airplane releasing pressure when you shut your door or at high elevation. They also give the hot air when you are running your AC somewhere to go. But as time goes on the OEM ones get stuck open due to dirt or mud, leaving a big hole for   dirt and debris to enter. All of our vent covers offer a charcoal filter option as well as a fully sealed option to fit your application. We recommend using the filter to keep the function the same as OEM but if you are mainly using your vehicle for off-roading then sometimes it’s best to fully seal it off.

This 96-02 4runner Vent Cover replaces the OEM cover under your stock bumper. This Cover is 100% plug and play and requires no drilling or cutting for installation. The front plate bolts to the rear plate creating a sandwich method which is better than any other mounting option on the market. This way there are no clips that often crack or warp from the sun. Everything required for installation is included. 

What’s included: 

(1) Charcoal Filter

(1) M4 x 45mm Mounting Bolt

(5) M4 x 14mm Mounting Bolts

(4) M4 x 8mm Mounting Bolts for the air filter or cover

(1) Front Mounting Plate with R cut out for filter Item #VC1F

(1) Back Mounting Plate with nuts embedded Item #VC1B

(1) Filter Mounting Plate Item #VCX

(1) Filter Cover Item #VCY

(1) Dust Proof Silicone Seal

Install Video: 

Vent Cover Install